Filters, Lint & Recovery

3MROP416-20A Quick-Connect Water Filter | 0.5 gpm 4-3/8 in Dia is a quick-connect water filter cartridge for compatible under-sink, reverse-osmosis support, commercial utility, and equipment water-filtration systems. This listing is written as a technical Corbett Equipment catalog listing for dry-cleaning shops, commercial utility service, equipment maintenance, water treatment, refrigeration/HVACR service, pneumatic systems, steam/gauge service, and industrial maintenance where the installed component matches the specifications below.

Use this listing only after comparing the installed part, physical dimensions, connection style, material, operating conditions, and machine or system documentation.

Technical Specifications

• Component type: quick-connect water filter cartridge.

• Public cartridge family: 3MROP416-20A.

• Rated flow: 0.5 gpm.

• Approximate diameter: 4-3/8 in.

• Approximate overall height: 13-3/4 in.

• Filter media: carbon block.

• Pressure range: 25 psi minimum to 100 psi maximum.

• Temperature range: 40 Degrees F minimum to 100 Degrees F maximum.

• Service-life reference: 6 months under compatible system conditions.

• Standards reference: NSF.

• Compatible product type: under-sink reverse-osmosis water filter systems.

• Compatible system models to verify: 3MRO301, 3MRO401, and 3MRO501.

• Ordering check: verify the installed filter head, cartridge family, diameter, height, clearance, pressure, temperature, service interval, and required filtration claims before ordering.

Related Parts & Compatibility Notes

• Do not substitute with RO membrane cartridges, sediment-only cartridges, whole-house cartridges, or other filter families unless the installed head confirms compatibility.

• This is separate from the RO membrane listing; compare the old cartridge body, head style, diameter, height, and system documentation before ordering.

Warnings & Restrictions

• Restriction note: this cartridge family is third-party certified as compliant with Safe Drinking Water Act low-lead requirements for potable and non-potable water applications.

• Certification and compatibility still depend on the complete installed system, filter head, service conditions, local requirements, and maintenance interval.

Machine Fitment & Industrial Use

Use where the installed water-filtration system calls for this quick-connect cartridge family and the system pressure, temperature, head style, and service interval match.

For dry-cleaning equipment, verify against the actual machine, valve panel, boiler or water-treatment system, gauge assembly, filtration system, utility line, pneumatic circuit, refrigeration service port, or service hose before ordering. If the product is being used outside dry cleaning, confirm compatibility with the application and operating conditions before installation.

Installation & Ordering Verification

• Compare the product photo, installed component, size, connection style, and service location before ordering.

• Confirm pressure, flow, temperature, material, chemical exposure, media compatibility, clearance, and mounting for the actual system.

• Use qualified service personnel when installing pressure, steam, refrigeration, water, electrical, pneumatic, or equipment-control components.

• Send photos of the installed part, machine tag, and service location if fitment is uncertain.

Culligan RC-EZ-4 Quick Connect Water Filter | 0.5 gpm 0.5 Micron is a quick-connect replacement water filter cartridge for compatible under-sink, shop utility, and equipment water-filtration service. This listing is written as a technical Corbett Equipment catalog listing for dry-cleaning shops, commercial utility service, equipment maintenance, water treatment, refrigeration/HVACR service, pneumatic systems, steam/gauge service, and industrial maintenance where the installed component matches the specifications below.

Use this listing only after comparing the installed part, physical dimensions, connection style, material, operating conditions, and machine or system documentation.

Technical Specifications

• Component type: quick-connect replacement water filter cartridge.

• Public cartridge family: RC-EZ-4.

• Rated flow: 0.5 gpm.

• Filtration rating: 0.5 micron.

• Approximate dimensions: 2-3/4 in outside diameter x 12-1/2 in height.

• Service role: water filtration for compatible filter-head systems where the installed cartridge, lock style, clearance, and flow requirements match.

• Ordering check: verify the old cartridge markings, filter head, cartridge lock style, clearance, water pressure, flow requirement, and filtration requirement before ordering.

Related Parts & Compatibility Notes

• Do not substitute with another quick-connect cartridge, RO membrane, sediment filter, or carbon filter unless the installed filter head and system documentation confirm compatibility.

• Compare the old cartridge body, head style, cartridge markings, diameter, height, and service requirement before ordering.

Machine Fitment & Industrial Use

Use for compatible shop, equipment, and utility-water filtration where the installed system calls for the same cartridge family and physical connection.

For dry-cleaning equipment, verify against the actual machine, valve panel, boiler or water-treatment system, gauge assembly, filtration system, utility line, pneumatic circuit, refrigeration service port, or service hose before ordering. If the product is being used outside dry cleaning, confirm compatibility with the application and operating conditions before installation.

Installation & Ordering Verification

• Compare the product photo, installed component, size, connection style, and service location before ordering.

• Confirm pressure, flow, temperature, material, chemical exposure, media compatibility, clearance, and mounting for the actual system.

• Use qualified service personnel when installing pressure, steam, refrigeration, water, electrical, pneumatic, or equipment-control components.

• Send photos of the installed part, machine tag, and service location if fitment is uncertain.

Filter Foam Half Sheet 36 x 48 x 2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 36 in x 48 in half sheet in 2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 36 in x 48 in.

• Nominal thickness: 2 in.

• Sheet format: half sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 36 in x 48 in half sheet, 2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Full Sheet 72 x 48 x 2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 72 in x 48 in full sheet in 2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 72 in x 48 in.

• Nominal thickness: 2 in.

• Sheet format: full sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 72 in x 48 in full sheet, 2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Half Sheet 36 x 48 x 1-1/2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 36 in x 48 in half sheet in 1-1/2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 36 in x 48 in.

• Nominal thickness: 1-1/2 in.

• Sheet format: half sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 1-1/2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 36 in x 48 in half sheet, 1-1/2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 1-1/2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Full Sheet 72 x 48 x 1-1/2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 72 in x 48 in full sheet in 1-1/2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 72 in x 48 in.

• Nominal thickness: 1-1/2 in.

• Sheet format: full sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 1-1/2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 72 in x 48 in full sheet, 1-1/2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 1-1/2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Half Sheet 36 x 48 x 1/2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 36 in x 48 in half sheet in 1/2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 36 in x 48 in.

• Nominal thickness: 1/2 in.

• Sheet format: half sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 1/2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 36 in x 48 in half sheet, 1/2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 1/2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Full Sheet 72 x 48 x 1/2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 72 in x 48 in full sheet in 1/2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 72 in x 48 in.

• Nominal thickness: 1/2 in.

• Sheet format: full sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 1/2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 72 in x 48 in full sheet, 1/2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 1/2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Half Sheet 36 x 48 x 1/4 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 36 in x 48 in half sheet in 1/4 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 36 in x 48 in.

• Nominal thickness: 1/4 in.

• Sheet format: half sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 1/4 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 36 in x 48 in half sheet, 1/4 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 1/4 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Filter Foam Full Sheet 72 x 48 x 1/4 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 72 in x 48 in full sheet in 1/4 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 72 in x 48 in.

• Nominal thickness: 1/4 in.

• Sheet format: full sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 1/4 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 72 in x 48 in full sheet, 1/4 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 1/4 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.

Water Strainer 1 in with Clear Bowl & 50 Mesh Screen is a replacement water strainer for dry-cleaning machine water-service filtration, maintenance, and service work where a shop needs a clear bowl strainer assembly.

The visible markings and recovered product photos identify a 1 in strainer body with clear bowl and 50 mesh screen. Confirm the existing strainer, thread size, flow direction, and service conditions before ordering.

Technical Specifications

• Product type: water strainer assembly.

• Nominal connection size: 1 in.

• Bowl style: clear bowl for visual inspection.

• Screen: 50 mesh screen identified from recovered product labeling.

• Use case: water-service filtration and maintenance on compatible dry-cleaning equipment.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, or Realstar part number is confirmed for this listing. Order and verify this item by the 1 in strainer size, clear-bowl configuration, 50 mesh screen detail, and the installed machine application.

Machine Fitment

This strainer may be used where the machine setup requires a 1 in water strainer with a clear bowl and screen. Fitment depends on the installed plumbing, thread style, flow direction, service temperature, pressure, and clearance around the bowl.

Ordering Verification

• Confirm the installed strainer uses a 1 in connection.

• Confirm clear-bowl clearance and service access before installation.

• Compare the screen requirement against the shop's existing water-service setup.

• Send photos of the old strainer and machine tag if you need fitment help before ordering.

Filter Foam 14 x 18 x 3/4 in | FMB 403011/MTP / Union/Realstar 403011.

This 14 inch by 18 inch by 3/4 inch filter foam pad is used in compatible dry-cleaning machine filtration, lint, and recovery service where the filter frame and service records match the 403011 / 403011/MTP foam path.

Use this listing when the installed foam pad, filter frame, machine manual, or service record matches 403011 / 403011/MTP or legacy reference L18547. Before ordering, compare the installed foam size, thickness, frame or housing location, and filter-service area.

Technical Specifications

• Component type: filter foam / filtration media.

• Primary system: filtration, lint, and recovery service.

• Nominal size: 14 in x 18 in.

• Nominal thickness: 3/4 in.

• Part-number family: 403011 / 403011/MTP.

• Legacy reference: L18547.

• Primary application: compatible dry-cleaning machine filtration service where the installed filter frame accepts this foam footprint and thickness.

• Verification points: installed pad size, pad thickness, filter frame opening, retainer or seating channel, filter-service location, and machine service manual.

• Not a substitute for a gasket, screen, filter bag, cabinet pad, or full-sheet foam unless the machine manual and installed filtration arrangement confirm the same foam path.

Part Numbers & Cross References

Use this section to separate direct machine part numbers from legacy and Corbett/Wix reference terms. Always verify the installed foam pad, filter frame, service location, and machine manual before ordering.

Part Numbers

FMB / Firbimatic

• 403011

• 403011/MTP

Union

• 403011 where the Union manual and installed filter location match this foam path.

Realstar

• 403011 where the Realstar manual and installed filter location match this foam path.

Cross References

FMB / Firbimatic

• Legacy / old FMB reference: L18547.

• Old Corbett/Wix reference: Filter Foam 14 x 18 Dry Cleaning Part 403011/MTP.

Union

• FMB / Firbimatic cross-reference: 403011 / 403011/MTP when the Union machine manual, installed pad, and filter location match.

Realstar

• FMB / Firbimatic cross-reference: 403011 / 403011/MTP when the Realstar machine manual, installed pad, and filter location match.

Related Parts To Verify Separately

• Full-sheet foam and other foam-pad sizes are separate listings and should not be substituted unless the installed pad, frame, and manual confirm the same size and thickness requirement.

• Filter screens, filter bags, gaskets, seals, and cabinet pads are different components and are not replacements for this 14 x 18 x 3/4 in filter foam pad.

Machine Fitment

Machine fitment for Filter Foam 14 x 18 x 3/4 in | FMB 403011/MTP / Union/Realstar 403011 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

Corbett Equipment and FXT Factory records treat FMB / Firbimatic as the master machine-model lineage for this catalog family. Union, Realstar, and Sovrana references are derivative-reference families that must be matched through the installed component, manual table, and machine-specific service record.

FMB / Firbimatic machine models and master families

• EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.

• Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.

• F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.

• EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.

• EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.

• EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.

• Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.

• Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.

• System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.

• Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.

• Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.

• Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

• Core Union derivative references: HXP8018C, L840, P840.

• HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.

• L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.

• Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

• KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.

• Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.

• RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.

• Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Sovrana and other derivative-model references may appear in Corbett lineage records. Treat them as research clues only unless the installed component, machine manual, and part-number path confirm the application.

Ordering Verification

Confirm the installed foam pad measures 14 in x 18 in x 3/4 in and that the machine calls for 403011 / 403011/MTP or legacy L18547 before ordering.

Confirm the filter frame, retainer, or seating channel accepts 3/4 in foam without buckling, curling, or leaving bypass gaps around the pad.

Confirm this is the foam used in the filtration, lint, or recovery area, not a gasket, screen, filter bag, unrelated cabinet pad, or full-sheet foam supply.

Inspect the filter frame or housing for damage and clean the seating area before installation. Replace filtration media according to the machine maintenance schedule, shop conditions, and filtration performance.

Contact Corbett Equipment if you need help matching this foam pad to a FMB / Firbimatic, Union, Realstar, EcoGreen, or related FMB-lineage dry-cleaning machine.