Filter Foam Half Sheet 36 x 48 x 2 in | Cut-to-Fit

Filter Foam Half Sheet 36 x 48 x 2 in | Cut-to-Fit is bulk cut-to-fit filter foam sheet stock for dry-cleaning shop filtration, lint recovery, maintenance service, and industrial filtration applications where a shop wants to cut its own pads.

This listing is for the 36 in x 48 in half sheet in 2 in thickness. It is useful when a customer wants sheet stock that can be measured and cut to the filter frame instead of buying only pre-cut foam pads.

Technical Specifications

• Product type: cut-to-fit filter foam sheet stock.

• Nominal sheet size: 36 in x 48 in.

• Nominal thickness: 2 in.

• Sheet format: half sheet.

• Primary use: dry-cleaning filtration, lint recovery, shop maintenance, air filtration, equipment pre-filtering, and industrial filtration where the customer verifies size and operating conditions.

• Cutting method: measure the installed filter frame or existing pad, mark the sheet, and cut to the required shop pattern.

Industrial Filtration Uses

This sheet stock can be considered for dry-cleaning lint and recovery filtration, HVAC and ventilation pre-filter service, air compressor intake filtering, vacuum and dust-collector filtering, oil-mist and shop-air filtration, electrical or equipment cabinet dust control, small-engine air-filter service, projector and electronic-equipment dust screens, and other industrial panel-filter applications where the customer confirms compatibility.

Use this as a cut-to-fit industrial parts supply item. It is not sold as a universal fit for every machine, cabinet, intake, housing, or fluid path. Verify airflow, liquid or chemical exposure, compression, heat exposure, cleaning schedule, and replacement interval before use.

Cut-to-Fit Value

Buying foam by the sheet can help a shop save money when multiple pads can be cut from one sheet. Actual savings depend on the required pad size, shop cut pattern, trimming waste, and how often the filtration media is replaced.

For best results, keep a clean sample pad or accurate filter-frame measurement on hand before cutting. Label leftover material by thickness so 2 in sheet stock does not get mixed with other sheet-stock thicknesses during maintenance.

Part Numbers & Cross References

No single FMB / Firbimatic, Union, Realstar, or machine-specific part number is confirmed for this sheet-stock listing. Order this item by sheet size and thickness.

• 36 in x 48 in half sheet, 2 in thick.

• Cut-to-fit filter foam for dry-cleaning and industrial filtration service.

• Compare separately against pre-cut listings such as the 14 x 18 x 3/4 in 403011 foam pad when a machine-specific pad is required.

Machine Fitment & Cut-to-Fit Use

This product is not sold as a direct machine-specific foam pad. It is sheet stock for customers who want to cut their own pads for compatible filter frames, housings, intakes, panels, or service locations.

Confirm frame opening, required thickness, airflow path, chemical exposure, and maintenance schedule before installation. Many dry-cleaning systems can see drying temperatures around 200 F on the high side, so verify the material is appropriate for the actual operating environment before use.

Ordering Verification

• Confirm whether the job requires a full sheet or half sheet.

• Confirm whether the job requires 2 in thickness or a different thickness.

• Confirm the filter frame and installed pad dimensions before cutting.

• Confirm this sheet-stock listing is the right choice instead of a machine-specific pre-cut pad.