Pump Seal for Dueffe Pump | FMB / Union / Realstar 0702034 is a pump seal for compatible Dueffe pump service on dry-cleaning machines.
Use this listing when the installed pump seal, pump body, machine manual, or service record matches part number 0702034 or legacy reference M12635. This listing is for the Dueffe pump seal path and should not be mixed with Bermar pump seals or pump-cover O-rings unless the installed component matches.
Technical Specifications
Component type: pump seal.
Primary system: pump / solvent-circulation sealing service.
Part number: 0702034.
Legacy reference: M12635.
Pump reference: Dueffe pump seal path in Corbett evidence.
Verification points: pump body, seal dimensions, shaft fit, seating surfaces, seal material/path, and installed pump model.
Part Numbers & Cross References
Part Numbers
FMB / Firbimatic: 0702034.
Union: verify by installed pump seal, pump body, and machine manual.
Realstar: verify by installed pump seal, pump body, and machine manual.
Cross References
Legacy / old FMB reference: M12635.
Old Corbett/Wix reference: Pump Seal for Dueffe Pump 0702034.
Related but separate listings include Bermar pump seal 0702011 / M15130 and pump-cover O-ring 0702083 / M15131.
Machine Fitment
Machine fitment for Pump Seal for Dueffe Pump | FMB / Union / Realstar 0702034 is organized through Corbett Equipment/Firbimatic master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.
Master manufacturer / model lineage
Corbett Equipment/Firbimatic and FXT Factory records treat FMB / Firbimatic as the master machine-model lineage for this catalog family. Union, Realstar, and Sovrana references are derivative-reference families that must be matched through the installed component, manual table, and machine-specific service record.
FMB / Firbimatic machine models and master families
EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.
Union machine models and derivative families
Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.
Realstar machine models and derivative families
KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.
Sovrana and other derivative references
Sovrana and other derivative-model references may appear in Corbett lineage records. Treat them as research clues only unless the installed component, machine manual, and part-number path confirm the application.
Additional Numeric-Model Applications
For the matching installed component in the listed legacy numeric-model configuration. Only the matching DUE EFFE PR pump shaft-seal configuration; verify exact pump model/HP group, shaft size, seal geometry and solvent-compatible materials. Confirm the exact machine data plate, serial/revision and installed assembly before ordering. Numeric model designations are retained as printed; capacity or a similar commercial model name alone does not establish compatibility.
FMB / Firbimatic: 920, 925, 932, 940. Only the matching DUE EFFE PR pump shaft-seal configuration; verify exact pump model/HP group, shaft size, seal geometry and solvent-compatible materials.
F60 K / Omnia Applications
For the matching installed F60 K component/option. Only the matching installed DUE EFFE pump shaft-seal configuration on the documented PERC solvent/sludge pump options; verify exact pump, shaft, seal geometry and solvent-compatible materials. Confirm exact model, machine serial/revision and installed markings before ordering. The listed Omnia variants are conditional on the matching component and assembly; the model name or capacity alone is not sufficient.
FMB / Firbimatic: F60 K (25 kg).
FMB / Firbimatic — F25 Omnia LT2 (25 kg, configuration-qualified): Confirm the exact variant, data plate/serial and matching installed assembly. Only the matching installed DUE EFFE pump shaft-seal configuration on the documented PERC solvent/sludge pump options; verify exact pump, shaft, seal geometry and solvent-compatible materials.
FMB / Firbimatic — F25 Omnia LT3 (25 kg, configuration-qualified): Confirm the exact variant, data plate/serial and matching installed assembly. Only the matching installed DUE EFFE pump shaft-seal configuration on the documented PERC solvent/sludge pump options; verify exact pump, shaft, seal geometry and solvent-compatible materials.
FMB / Firbimatic — Omnia 60 (25 kg, configuration-qualified): Confirm the exact variant, data plate/serial and matching installed assembly. Only the matching installed DUE EFFE pump shaft-seal configuration on the documented PERC solvent/sludge pump options; verify exact pump, shaft, seal geometry and solvent-compatible materials.
Additional Configuration-Specific Applications
Only the matching DUE EFFE PR pump shaft-seal configuration; verify exact pump model/HP group, shaft size, seal geometry and solvent-compatible materials. These applications require the exact matching installed component and assembly configuration. Confirm machine data plate, serial/revision, ratings, dimensions and connections before ordering; model name or capacity alone is not sufficient.
FMB / Firbimatic — configuration-qualified: VORTEX S2020 (20 kg), Vortex 2020 (20 kg), Vortex 2025 (25 kg). Only the matching DUE EFFE PR pump shaft-seal configuration; verify exact pump model/HP group, shaft size, seal geometry and solvent-compatible materials. Application requires the matching installed assembly, component markings and machine serial/revision represented by the model-specific parts manual.
Installation & Ordering Verification
Follow pump and solvent-system service procedures before replacing seals.
Confirm part number 0702034 / M12635 and verify the installed pump is the Dueffe seal path.
Inspect shaft and seating surfaces before installing the new seal.
After installation, verify leak-free pump operation before returning the machine to service.