Replacement parts category

Refrigeration Parts

Refrigeration gauges, valves, controls, fittings, and service parts for dry-cleaning machine cooling, solvent recovery, and pressure-control systems.

Ask about this category Browse products

Refrigeration gauges valves and controls for dry cleaning machine recovery systems

22 mapped items

Service focus

What this category covers

Support refrigeration-side troubleshooting, pressure control, and recovery service work.

Machine systems

Refrigeration
Cooling
Recovery
Pressure control

Common request examples

Refrigeration gauges
Expansion valves
Pressure switches
Cooling-system service parts

21 catalog items

Refrigeration Parts products

Refrigeration Parts

Brass Hose Adapter | 1/4 SAE Male x 5/16 SAE Female

Brass Hose Adapter | 1/4 SAE Male x 5/16 SAE Female is a brass hose and service adapter for compatible HVACR, refrigeration, mini-split, service-tool, and industrial hose connections. This listing is written as a technical Corbett Equipment catalog listing for dry-cleaning shops, commercial utility service, equipment maintenance, water treatment, refrigeration/HVACR service, pneumatic systems, steam/gauge service, and industrial maintenance where the installed component matches the specifications below.

Use this listing only after comparing the installed part, physical dimensions, connection style, material, operating conditions, and machine or system documentation.

Technical Specifications

Component type: brass hose/service adapter.
End style: flared ends for HVACR service use.
Connection path: 1/4 in SAE male x 5/16 in SAE female.
Input connection size: 5/16 in.
Output connection size: 1/4 in.
Overall length: 1-3/8 in.
Temperature range: 0 Degrees F to 122 Degrees F.
Use family: HVACR, mini-split, ductless, refrigeration, and service-tool connections where the hose and port match.
Service fit: useful where a service hose, manifold, gauge hose, or mini-split service connection requires the listed SAE conversion.
Selection checkpoint: SAE flare connections seal differently than pipe-thread fittings, so match the port style and sealing surface rather than choosing by diameter alone.
Ordering check: verify refrigerant/service application, SAE thread form, sealing surface, pressure rating, service-tool compatibility, and installed clearance before ordering.

Related Parts & Compatibility Notes

Do not substitute for pipe-thread adapters, push-to-connect fittings, compression fittings, or dry-cleaning machine valve fittings unless every connection and service condition matches.
Use only where the service hose and service port match the listed SAE connection path.
If the hose end, gauge manifold, or service port uses NPT, compression, push-to-connect, or another thread family, choose a different fitting.

Machine Fitment & Industrial Use

Use for compatible refrigeration and HVACR service work where a 1/4 in SAE male to 5/16 in SAE female adapter is required.

For dry-cleaning equipment, verify against the actual machine, valve panel, boiler or water-treatment system, gauge assembly, filtration system, utility line, pneumatic circuit, refrigeration service port, or service hose before ordering. If the product is being used outside dry cleaning, confirm compatibility with the application and operating conditions before installation.

Installation & Ordering Verification

Compare the product photo, installed component, size, connection style, and service location before ordering.
Confirm pressure, flow, temperature, material, chemical exposure, media compatibility, clearance, and mounting for the actual system.
Use qualified service personnel when installing pressure, steam, refrigeration, water, electrical, pneumatic, or equipment-control components.
Send photos of the installed part, machine tag, and service location if fitment is uncertain.

Brass hose adapter 1/4 SAE male x 5/16 SAE female on white background

Part: Verify
System: Refrigeration
Type: Valve
Fitment: Firbimatic / FMB, Union, Realstar

Price$24.95

In stockAvailable in Wix StoresView

0913002

Water Valve, Danfoss 1/2 in | FMB / Union / Realstar 0913002

This Danfoss WVX / WVF15-style 1/2 inch pressostatic water valve is used in compatible FMB / Firbimatic, Union, and Realstar dry cleaning machine refrigeration and water-control systems. The valve helps regulate condenser water flow in response to refrigeration pressure so the machine can maintain proper cooling, recovery performance, and stable refrigeration operation.

This Danfoss WVX / WVF15-style 1/2 inch pressostatic water valve is used in compatible FMB / Firbimatic, Union, and Realstar dry cleaning machine refrigeration and water-control systems.

The valve helps regulate condenser water flow in response to refrigeration pressure so the machine can maintain proper cooling, recovery performance, and stable refrigeration operation.

Use this listing when the original machine part number, valve size, body markings, pressure-control arrangement, fittings, and service manual match 0913002 / F6528.

Technical Specifications

Component type: 1/2 inch pressostatic / pressure-operated water regulating valve.
Valve family: Danfoss WVX / WVF15 / WVi5-style 1/2 inch water valve, with older FMB/FM manual references to WYF15 D.1/2.
Primary application: refrigeration condenser water-control service on compatible FMB / Firbimatic, Union, and Realstar dry cleaning machines.
Function: regulates condenser water flow in response to refrigeration pressure to support cooling, recovery performance, and stable refrigeration operation.
Nominal size: 1/2 inch. Verify the installed valve body, fittings, pressure-control arrangement, and machine service manual before ordering.
Confirmed price-list description: 1/2 inch Danfoss WVX Water Valve / Water Valve Refrigeration.
Companion 3/4 inch pressostatic valve: 0913003 / F13623. Do not substitute the 3/4 inch valve for this 1/2 inch listing unless the machine manual and installed component confirm it.
Nearby thermostatic valve references 0914002 / V13841 and 0914004 / V1566 are different components and are not substitutes for this listing.

Part Numbers & Cross References

Use this section to separate direct brand part numbers from cross-reference and legacy/manual references. Always verify the installed component, valve size, body markings, fittings, pressure-control arrangement, and service manual before ordering.

Part Numbers

FMB / Firbimatic

0913002
09.13.002
F6528
F8526

Union

0913002
09.13.002

Realstar

0913002

Cross References

FMB / Firbimatic

Legacy price-list cross-reference: F6528, described as a 1/2 inch Danfoss WVX Water Valve / Water Valve Refrigeration.
Manual-page legacy reference: F8526 appears in older FMB/FM valve-table material for pressostatica tipo WYF15 D.1/2. Confirm against the installed component and manual before substitution.
Valve-family wording found in manuals: Danfoss WVX, WVF15, WVi5, and WYF15-style 1/2 inch pressostatic water valve references.

Union

FMB / Firbimatic cross-reference: 0913002.
Formatted manual-style reference: 09.13.002.
Legacy FMB / Firbimatic references for verification: F6528 and F8526 when the Union machine manual, installed valve, and valve size match.

Realstar

FMB / Firbimatic cross-reference: 0913002.
Legacy FMB / Firbimatic references for verification: F6528 and F8526 when the Realstar machine manual, installed valve, and valve size match.

Related Parts To Verify Separately

0913003 / F13623 is the companion 3/4 inch pressostatic valve.
0914002 / V13841 and 0914004 / V1566 are thermostatic valve references, not this 1/2 inch pressostatic water valve.

Machine Fitment

Machine fitment for Water Valve, Danfoss 1/2 in | FMB / Union / Realstar 0913002 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

Corbett Equipment and FXT Factory records treat FMB / Firbimatic as the master machine-model lineage for this catalog family. Union, Realstar, and Sovrana references are derivative-reference families that must be matched through the installed component, manual table, and machine-specific service record.

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Sovrana and other derivative-model references may appear in Corbett lineage records. Treat them as research clues only unless the installed component, machine manual, and part-number path confirm the application.

Ordering Verification

Confirm the part number, installed valve markings, valve size, fitting style, pressure-control arrangement, and machine model before ordering.

Confirm this is the 1/2 inch pressostatic water valve before replacing it. The nearby 3/4 inch pressostatic valve and thermostatic water valves are different parts.

For FMB / Firbimatic, Union, and Realstar machines, match the listing against the machine data plate, service manual table, installed component markings, and physical valve/fitting configuration.

Contact Corbett Equipment if you need help matching the valve to a FMB / Firbimatic, Union, Realstar, or related FMB-lineage dry cleaning machine.

Danfoss WVFX15 003N2103 1/2 inch water valve 0913002 primary product photo for FMB Union and Realstar dry cleaning machines

Part: 0913002
System: Pneumatic / valves
Type: Valve
Fitment: Firbimatic / FMB, Union, Realstar

Price$240.00

In stockAvailable in Wix StoresView

0918066

Danfoss Orifice #2 | FMB / Union / Realstar 0918066

Danfoss Orifice #2 Dry Cleaning Part 0918066 / Old F8008 . Danfoss orifice #2, part 0918066, is a refrigeration-metering insert used with compatible Danfoss expansion-valve assemblies on FMB / Firbimatic, Union, and Realstar dry-cleaning machines.

Danfoss Orifice #2 Dry Cleaning Part 0918066 / Old F8008.

Danfoss orifice #2, part 0918066, is a refrigeration-metering insert used with compatible Danfoss expansion-valve assemblies on FMB / Firbimatic, Union, and Realstar dry-cleaning machines.

This small part must be matched to the mating valve body and refrigeration application, because an incorrect orifice can affect evaporator feed, cooling performance, and recovery behavior.

Use this listing when the installed orifice and service records match FMB / Firbimatic 0918066 or old reference F8008.

Technical Specifications

Component type: Danfoss refrigeration valve orifice insert.
Orifice size: #2.
Primary system: refrigeration circuit.
Primary application: dry-cleaning machine refrigeration service and repair.
Verification points: Danfoss valve family, orifice size, mating expansion-valve body, refrigerant circuit, and installed component markings.
Evidence source: Corbett recovered product database for 0918066 and old reference F8008.

Part Numbers & Cross References

Part Numbers

FMB / Firbimatic

0918066
F8008

Union

Not confirmed in the current Corbett Equipment database. Verify by installed component and service manual.

Realstar

Not confirmed in the current Corbett Equipment database. Verify by installed component and service manual.

Cross References

FMB / Firbimatic

Old reference F8008

Union

Verify by shared FMB / Union refrigeration-system lineage and installed Danfoss orifice.

Realstar

Verify by shared FMB / Realstar refrigeration-system lineage and installed Danfoss orifice.

Machine Fitment

Machine fitment for Danfoss Orifice #2 | FMB / Union / Realstar 0918066 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm the installed Danfoss valve family, #2 orifice size, mating valve body, refrigeration circuit, machine model, and service manual before ordering. Contact Corbett Equipment if you need help matching this orifice to a FMB / Firbimatic, Union, Realstar, or related FMB-lineage machine.

0918066 Danfoss Danfoss Orifice #2 | FMB / Union / Realstar 0918066 primary product photo for dry cleaning machine service

Part: 0918066
System: Pneumatic / valves
Type: Valve
Fitment: Firbimatic / FMB, Union, Realstar

Price$49.99

In stockAvailable in Wix StoresView

0912018

Danfoss TX2 Thermostatic Expansion Valve | FMB / Union / Realstar 0912018

Danfoss TX2 Thermostatic Expansion Valve - PN 0912018 . Danfoss TX2 thermostatic expansion valve 0912018 is used in the refrigeration system on compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machines.

Danfoss TX2 Thermostatic Expansion Valve - PN 0912018.

Danfoss TX2 thermostatic expansion valve 0912018 is used in the refrigeration system on compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machines.

The expansion valve meters refrigerant flow and should be matched to the installed valve body, sensing element, orifice arrangement, refrigerant application, and machine manual.

Use this listing when the installed component and service records match FMB / Firbimatic 0912018.

Technical Specifications

Component type: Danfoss TX2 thermostatic expansion valve.
Primary system: refrigeration circuit.
Primary application: dry-cleaning machine refrigeration service and repair.
Verification points: valve body, TX2 marking, orifice compatibility, refrigerant circuit, sensing bulb/capillary arrangement, fittings, and installed component markings.
Evidence source: Firbimatic parts database/manual evidence for 0912018.

Part Numbers & Cross References

Part Numbers

FMB / Firbimatic

0912018

Union

Not confirmed in the current Corbett Equipment database. Verify by installed component and service manual.

Realstar

Not confirmed in the current Corbett Equipment database. Verify by installed component and service manual.

Cross References

FMB / Firbimatic

Danfoss TX2 expansion valve application.

Union

Verify by shared FMB / Union refrigeration-system lineage and installed Danfoss valve.

Realstar

Verify by shared FMB / Realstar refrigeration-system lineage and installed Danfoss valve.

Machine Fitment

Machine fitment for Danfoss TX2 Thermostatic Expansion Valve | FMB / Union / Realstar 0912018 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm the installed TX2 valve, orifice, refrigerant application, fittings, sensing-bulb arrangement, machine model, and service manual before ordering. Contact Corbett Equipment if you need help matching this valve to a FMB / Firbimatic, Union, Realstar, or related FMB-lineage machine.

0912018 Danfoss Danfoss TX2 Thermostatic Expansion Valve | FMB / Union / Realstar 0912018 primary product photo for dry cleaning machine service

Part: 0912018
System: Pneumatic / valves
Type: Valve
Fitment: Firbimatic / FMB, Union, Realstar

Price$168.50

In stockAvailable in Wix StoresView

0804045

Low Pressure Side HVAC Refrigeration Gauge | FMB / Union / Realstar 0804045

Low Pressure Side HVAC Refrigeration Gauge | FMB / Union / Realstar 0804045 is a gauge used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Refrigeration work. Use this listing when the installed gauge, machine manual, service record, or component label matches 0804045.

Low Pressure Side HVAC Refrigeration Gauge | FMB / Union / Realstar 0804045 is a gauge used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Refrigeration work.

Use this listing when the installed gauge, machine manual, service record, or component label matches 0804045. Before ordering, compare pressure range, dial markings, fitting style, mounting, and installed circuit location.

Technical Specifications

Component type: gauge.
Primary system: Refrigeration.
Primary identifier: 0804045.
Corbett evidence note: Low Pressure Side HVAC Refrigeration Gauge Dry Cleaning Part 0804045..
Corbett evidence note: Component type: Gauge...
Corbett evidence note: Primary system: Refrigeration...
Verification points: pressure range, dial markings, fitting style, mounting, and installed circuit location.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 0804045.

Cross References

No separate legacy old-number code is confirmed in the current Corbett evidence for this listing.
Evidence note: Component type: Refrigeration / pressure instrument component...
Evidence note: Catalog category: Heating & Refrigeration...

Machine Fitment

Machine fitment for Low Pressure Side HVAC Refrigeration Gauge | FMB / Union / Realstar 0804045 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 0804045 before ordering.
Compare pressure range, dial markings, fitting style, mounting, and installed circuit location against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

0804045 Low Pressure Side HVAC Refrigeration Gauge | FMB / Union / Realstar 0804045 primary product photo for dry cleaning machine service

Part: 0804045
System: Refrigeration
Type: Gasket / seal
Fitment: Firbimatic / FMB, Union, Realstar

Price$67.20

In stockAvailable in Wix StoresView

0804046

0804046 high side freon pressure gauge oil filled | FMB/Union/Realstar 0804046

0804046 high side freon pressure gauge oil filled | FMB/Union/Realstar 0804046 is a gauge used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Refrigeration work. Use this listing when the installed gauge, machine manual, service record, or component label matches 0804046.

0804046 high side freon pressure gauge oil filled | FMB/Union/Realstar 0804046 is a gauge used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Refrigeration work.

Use this listing when the installed gauge, machine manual, service record, or component label matches 0804046. Before ordering, compare pressure range, dial markings, fitting style, mounting, and installed circuit location.

Technical Specifications

Component type: gauge.
Primary system: Refrigeration.
Primary identifier: 0804046.
Corbett evidence note: Component type: Gauge...
Corbett evidence note: FMB / Firbimatic.
Corbett evidence note: Verify Union fitment by installed component, manual, and FMB machine lineage...
Verification points: pressure range, dial markings, fitting style, mounting, and installed circuit location.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 0804046.

Cross References

No separate legacy old-number code is confirmed in the current Corbett evidence for this listing.
Evidence note: Verify Realstar fitment by installed component, manual, and FMB machine lineage...
Evidence note: Legacy / old FMB references.

Machine Fitment

Machine fitment for 0804046 high side freon pressure gauge oil filled | FMB/Union/Realstar 0804046 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 0804046 before ordering.
Compare pressure range, dial markings, fitting style, mounting, and installed circuit location against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

0804046 0804046 high side freon pressure gauge oil filled | FMB/Union/Realstar 0804046 primary product photo for dry cleaning machine service

Part: 0804046
System: Refrigeration
Type: Gasket / seal
Fitment: Firbimatic / FMB, Union, Realstar

Price$67.20

In stockAvailable in Wix StoresView

0806002

Low Pressure Switch, Danfoss KP1 | FMB 0806002 / Union 080602 / Realstar 0806002

Low Pressure Switch, Danfoss KP1 | FMB 0806002 / Union 080602 / Realstar 0806002 is an electrical switch used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Electrical / controls work. Use this listing when the installed electrical switch, machine manual, service record, or component label matches 0806002, 080602, F6217.

Use this listing when the installed electrical switch, machine manual, service record, or component label matches 0806002, 080602, F6217. Before ordering, compare model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit.

Technical Specifications

Component type: electrical switch.
Primary system: Electrical / controls.
Primary identifiers: 0806002, 080602, F6217.
Legacy / old reference: F6217.
Corbett evidence note: KP1 Low Side Pressure Switch (Old #F6217)..
Corbett evidence note: Component type: Switch...
Corbett evidence note: Primary brand line: Firbimatic...
Verification points: model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 0806002.
Corbett / manufacturer reference: 080602.
Corbett / manufacturer reference: F6217.

Cross References

Legacy / old reference: F6217.
Evidence note: KP1 Low Side Pressure Switch (Old #F6217)...
Evidence note: Danfoss KP1 Low Side Pressure Switch Dry Cleaning Part 0806002...

Machine Fitment

Machine fitment for Low Pressure Switch, Danfoss KP1 | FMB 0806002 / Union 080602 / Realstar 0806002 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 0806002, 080602, F6217 before ordering.
Compare model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

0806002 Danfoss Low Pressure Switch, Danfoss KP1 | FMB 0806002 / Union 080602 / Realstar 0806002 primary product photo for dry cleaning machine service

Part: 0806002
System: Electrical / controls
Type: Gasket / seal
Fitment: Firbimatic / FMB, Union, Realstar

Price$76.69

In stockAvailable in Wix StoresView

0806009

Pressure Switch, Danfoss KPR1 | FMB / Union / Realstar 0806009

Pressure Switch, Danfoss KPR1 | FMB / Union / Realstar 0806009 is an electrical switch used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Pneumatic / valves work. Use this listing when the installed electrical switch, machine manual, service record, or component label matches 0806009, A15580.

Use this listing when the installed electrical switch, machine manual, service record, or component label matches 0806009, A15580. Before ordering, compare connection size, port style, function, body markings, flow direction, and installed circuit.

Technical Specifications

Component type: electrical switch.
Primary system: Pneumatic / valves.
Primary identifiers: 0806009, A15580.
Legacy / old reference: A15580.
Corbett evidence note: Danfoss KPR1 Pressostat -NITRO/STEAM/AIR Dry Cleaning Part 0806009..
Corbett evidence note: Primary brand line: Firbimatic...
Corbett evidence note: Danfoss KPR1 Pressostat -NITRO/STEAM/AIR Dry Cleaning Part 0806009...
Verification points: connection size, port style, function, body markings, flow direction, and installed circuit.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 0806009.
Corbett / manufacturer reference: A15580.

Cross References

Legacy / old reference: A15580.
Evidence note: KPR1 Pressostat -NITRO/STEAM/AIR (Old #A15580)...
Evidence note: KPR1 Pressostat - Danfoss (Old #A15580)...

Machine Fitment

Machine fitment for Pressure Switch, Danfoss KPR1 | FMB / Union / Realstar 0806009 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 0806009, A15580 before ordering.
Compare connection size, port style, function, body markings, flow direction, and installed circuit against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

0806009 Danfoss Pressure Switch, Danfoss KPR1 | FMB / Union / Realstar 0806009 primary product photo for dry cleaning machine service

Part: 0806009
System: Electrical / controls
Type: Valve
Fitment: Firbimatic / FMB, Union, Realstar

Price$129.00

In stockAvailable in Wix StoresView

0913003

Water Valve, Danfoss 3/4 in | FMB PU091303 / Union PU091303 / Realstar 0913003

Water Valve, Danfoss 3/4 in | FMB PU091303 / Union PU091303 / Realstar 0913003 is a valve used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Pneumatic / valves work. Use this listing when the installed valve, machine manual, service record, or component label matches PU091303, 0913003, F13623.

Use this listing when the installed valve, machine manual, service record, or component label matches PU091303, 0913003, F13623. Before ordering, compare connection size, port style, function, body markings, flow direction, and installed circuit.

Technical Specifications

Component type: valve.
Primary system: Pneumatic / valves.
Primary identifiers: PU091303, 0913003, F13623.
Legacy / old reference: F13623.
Corbett evidence note: 3/4" Danfoss WFVX20 Water Valve Refrigeration (Old #F13623)...
Corbett evidence note: Component type: Valve...
Corbett evidence note: Primary system: Pneumatic / valves...
Verification points: connection size, port style, function, body markings, flow direction, and installed circuit.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: PU091303.
Corbett / manufacturer reference: 0913003.
Corbett / manufacturer reference: F13623.

Cross References

Legacy / old reference: F13623.
Evidence note: Component type: Valve / fluid or pneumatic control component...
Evidence note: Catalog category: Valves...

Machine Fitment

Machine fitment for Water Valve, Danfoss 3/4 in | FMB PU091303 / Union PU091303 / Realstar 0913003 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm PU091303, 0913003, F13623 before ordering.
Compare connection size, port style, function, body markings, flow direction, and installed circuit against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

0913003 Danfoss Water Valve, Danfoss 3/4 in | FMB PU091303 / Union PU091303 / Realstar 0913003 primary product photo for dry cleaning machine service

Part: 0913003
System: Pneumatic / valves
Type: Valve
Fitment: Firbimatic / FMB, Union, Realstar

Price$315.00

In stockAvailable in Wix StoresView

080601

Danfoss High Pressure Cut-Off Switch KP5 080601 | FMB/Union/Realstar 080601

Danfoss High Pressure Cut-Off Switch KP5 080601 | FMB/Union/Realstar 080601 is an electrical switch used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Electrical / controls work. Use this listing when the installed electrical switch, machine manual, service record, or component label matches 080601.

Use this listing when the installed electrical switch, machine manual, service record, or component label matches 080601. Before ordering, compare model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit.

Technical Specifications

Component type: electrical switch.
Primary system: Electrical / controls.
Primary identifier: 080601.
Corbett evidence note: Component type: Switch...
Corbett evidence note: FMB / Firbimatic.
Corbett evidence note: Verify Union fitment by installed component, manual, and FMB machine lineage...
Verification points: model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 080601.

Cross References

No separate legacy old-number code is confirmed in the current Corbett evidence for this listing.
Evidence note: Verify Realstar fitment by installed component, manual, and FMB machine lineage...
Evidence note: Legacy / old FMB references.

Machine Fitment

Machine fitment for Danfoss High Pressure Cut-Off Switch KP5 080601 | FMB/Union/Realstar 080601 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 080601 before ordering.
Compare model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

080601 Danfoss Danfoss High Pressure Cut-Off Switch KP5 080601 | FMB/Union/Realstar 080601 primary product photo for dry cleaning machine service

Part: 080601
System: Electrical / controls
Type: Gasket / seal
Fitment: Firbimatic / FMB, Union, Realstar

Price$76.69

In stockAvailable in Wix StoresView

080602

Low Pressure Switch, Danfoss KP1 | FMB 080602 / Union 080602 / Realstar 0806002

Low Pressure Switch, Danfoss KP1 | FMB 080602 / Union 080602 / Realstar 0806002 is an electrical switch used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Electrical / controls work. Use this listing when the installed electrical switch, machine manual, service record, or component label matches 080602, 0806002, F6217.

Use this listing when the installed electrical switch, machine manual, service record, or component label matches 080602, 0806002, F6217. Before ordering, compare model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit.

Technical Specifications

Component type: electrical switch.
Primary system: Electrical / controls.
Primary identifiers: 080602, 0806002, F6217.
Legacy / old reference: F6217.
Corbett evidence note: KP1 Low Side Pressure Switch (Old #F6217)..
Corbett evidence note: Component type: Switch...
Corbett evidence note: Primary brand line: Firbimatic...
Verification points: model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 080602.
Corbett / manufacturer reference: 0806002.
Corbett / manufacturer reference: F6217.

Cross References

Legacy / old reference: F6217.
Evidence note: KP1 Low Side Pressure Switch (Old #F6217)...
Evidence note: Danfoss KP1 Low Side Pressure Switch Dry Cleaning Part 0806002...

Machine Fitment

Machine fitment for Low Pressure Switch, Danfoss KP1 | FMB 080602 / Union 080602 / Realstar 0806002 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 080602, 0806002, F6217 before ordering.
Compare model marking, voltage, contact or pin arrangement, terminal layout, mounting, and installed control circuit against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

080602 Danfoss Low Pressure Switch, Danfoss KP1 | FMB 080602 / Union 080602 / Realstar 0806002 primary product photo for dry cleaning machine service

Part: 080602
System: Electrical / controls
Type: Gasket / seal
Fitment: Firbimatic / FMB, Union, Realstar

Price$76.69

In stockAvailable in Wix StoresView

080403

Refrigeration Gauge, Low Side | FMB 080403 / Union 080403 / Realstar 0804003

Refrigeration Gauge, Low Side | FMB 080403 / Union 080403 / Realstar 0804003 is a gauge used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Refrigeration work. Use this listing when the installed gauge, machine manual, service record, or component label matches 080403, 0804003, F7594, 0804020.

Refrigeration Gauge, Low Side | FMB 080403 / Union 080403 / Realstar 0804003 is a gauge used in compatible FMB / Firbimatic, Union, and Realstar dry-cleaning machine service for Refrigeration work.

Use this listing when the installed gauge, machine manual, service record, or component label matches 080403, 0804003, F7594, 0804020. Before ordering, compare pressure range, dial markings, fitting style, mounting, and installed circuit location.

Technical Specifications

Component type: gauge.
Primary system: Refrigeration.
Primary identifiers: 080403, 0804003, F7594, 0804020.
Legacy / old reference: F7594.
Corbett evidence note: Gauge Low Side Refrigeration Dry Cleaning Part 0804003..
Corbett evidence note: Component type: Gauge...
Corbett evidence note: Primary system: Refrigeration...
Verification points: pressure range, dial markings, fitting style, mounting, and installed circuit location.

Part Numbers & Cross References

Part Numbers

Corbett / manufacturer reference: 080403.
Corbett / manufacturer reference: 0804003.
Corbett / manufacturer reference: F7594.
Corbett / manufacturer reference: 0804020.

Cross References

Legacy / old reference: F7594.
Evidence note: Component type: Refrigeration / pressure instrument component...
Evidence note: Primary brand line: Firbimatic...

Machine Fitment

Machine fitment for Refrigeration Gauge, Low Side | FMB 080403 / Union 080403 / Realstar 0804003 is organized through Corbett Equipment master manufacturer and model-lineage evidence. Use this section as a fitment-reference map, then verify the installed component, machine data plate, service manual, dimensions, voltage or pressure ratings where applicable, mounting, fittings, and part-number path before ordering.

Master manufacturer / model lineage

FMB / Firbimatic machine models and master families

EcoPro / ECOPRO family: ECOPRO 915, ECOPRO 915S, ECOPRO 918, ECOPRO 918S, ECOPRO AM, ECOPRO AM918.
Saver family: SAVER 35, SAVER 350, SAVER 35P, SAVER 350P, SAVER 40, SAVER 40P, SAVER 80SM, SAVER HYDROCARBON.
F-series / 18 kg family: F AS 18 LT2, F AS 18 ST2, F18 LT2, F18 LT3, F18 ST2.
EcoGreen family: EcoGreen 35, EcoGreen 40 / L2118, EcoGreen 50 / L2120, EcoGreen 60 / L2125, EcoGreen 80 / L2132, EcoGreen 95, EcoGreen 95SM, EcoGreen DC, EcoGreen S50 / S2120, EcoGreen Advance.
EcoGreen SM / AM-prefix soft-mount family: AM918, AM925, AM940, AM2118, S2118, EcoGreen 40SM, EcoGreen 60SM, EcoPro 40SM, EcoPro 60SM.
EcoLine family: EcoLine 35, ECOLINE, ECOLINE 16.
Vortex family: VORTEX 40, VORTEX 50, VORTEX 80, VORTEX 95, VORTEX L2018, VORTEX S2018, VORTEX PRIMARY, Vortex 40 Plus, Vortex 50 Plus, Vortex 80 Plus, Vortex 50 Plus Tandem.
Axial family: AXIAL 40, AXIAL 918, AXIAL 925, AXIAL-918.
System and feature lineage: Hydro-Vac, Hydro-Chill, Tri-Flow, Smart-10, SecureLock, and related recovery, filtration, distillation, cooling, and control-system records.
Other recovered FMB reference families: Eco-15LT3, Eco-15LT-3, L 18, L-250, L750, L2118, P16, P1567, P1705, P6241, T1838.
Recovered numeric model set: 035, 05, 068, 08, 09, 10, 100, 12, 120, 13, 130, 14, 15, 153, 16, 20, 208, 220, 23, 24, 25, 30, 306, 310, 32, 338, 340, 35, 36, 37, 40, 410, 45, 465, 473, 50, 520, 60, 600, 63, 70, 71, 724, 765, 80, 895, 896, 918, 95.
Factory/model-code references observed in recovered Corbett lineage records: HC7-18-CL, HC7-18-CLM, HC7-18-CS, HC8-18-CL, HC8-18-CLM, HC8-18-CS.

Union machine models and derivative families

Core Union derivative references: HXP8018C, L840, P840.
HL / HP / HXL family references: HL-780, HL780, HL-840, HL840K, HP840K, HXL8018K, HL-850, HL850K, HP850K, HL-860, HL860K, HP860K, HXL8025K, HL-880, HL880K, HXL8032K, HL-890, HL890K.
L / RS family references: L740S, L740, HL740, L750, RS-102, RS-122, RS-152.
Verify Union fitment by matching the installed part, Union manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Realstar machine models and derivative families

KM / KT derivative references: KM315, KM315-K4, KT215, KT215-K4, KM343, KM343-K4, KT343, KT343-K4.
Larger KM / KT references: KM403, KM403-K4, KT403, KT403-K4, KM503, KM503-K4, KT503, KM703, KM703-K4, KM803, KM803-K4.
RKM references: KM-36 / RKM36, KM-340 / RKM340, KM-400 / RKM400.
Verify Realstar fitment by matching the installed part, Realstar manual table, FMB / Firbimatic master-model relationship, connection details, and service location.

Sovrana and other derivative references

Ordering Verification

Confirm 080403, 0804003, F7594, 0804020 before ordering.
Compare pressure range, dial markings, fitting style, mounting, and installed circuit location against the installed component.
Inspect the mating parts, wiring, fittings, sealing surfaces, or mounting hardware before installation.
After installation, verify correct machine operation and leak-free or electrically safe service before returning equipment to use.

080403 Refrigeration Gauge, Low Side | FMB 080403 / Union 080403 / Realstar 0804003 primary product photo for dry cleaning machine service

Part: 080403
System: Refrigeration
Type: Gasket / seal
Fitment: Firbimatic / FMB, Union, Realstar

Price$67.20

In stockAvailable in Wix StoresView

Search all products Request category help

Technical category reference

Selection, compatibility, and ordering guidance

Technical selection guidance

Confirm refrigerant and oil compatibility, pressure and temperature range, connection type and size, valve or control function, electrical rating, flow direction, and installed system location. Refrigeration service should be performed by qualified personnel using the machine and component service information.

Catalog and ordering notes

Category membership is organized in the Wix dashboard. Product pages remain the source for current price, availability, Corbett Equipment SKU, factory number, specifications, images, condition, warnings, and exact compatibility language.

Corbett Equipment is an independent parts supplier. Brand and model references identify the equipment or research context and do not by themselves imply manufacturer authorization, affiliation, or universal fit.